Skip to content
LawnElm

Spring

March in the yard: thaw, first mow and the first spring jobs

March is when the soil starts to decide the schedule. Northern lawns come out from under the snow, southern lawns face the first preemergent and green-up questions, and desert lawns change over from winter grass.

By LawnElm Editorial Team Updated 6 min read

Cool belt
Thaw, thin spots, mowing
Warm belt
Preventers, then green-up
Dry West
Spring feeding, seeding
Illustration: a thawed lawn with matted patches, a rake and a bag of seed

Short version

In March the cool-season belt checks for snow mold, overseeds thin spots and cleans up old growth. The transition belt moves to weed preventers, a first feeding of fescue and seeding. The warm belt waits for green-up and for the soil to warm. The dry West starts spring feeding and seeding, and the low desert begins its switch from winter grass to bermudagrass. Dates shift with the year and the county.

Soil temperatures that matter in March

Extension services give March jobs as soil temperatures, because the same week can be a thaw in Minnesota and green-up in Georgia. Four numbers come up in the sources for this page.

Soil temperature triggers in the extension sources
TriggerSoil temperatureSource
Crabgrass seeds germinateAverage 55 degrees F for 7 to 10 daysUniversity of Maryland Extension
Crabgrass preventer windowSustained 53 to 55 degrees F for 5 daysUniversity of Maryland Extension
First spring nitrogen on bermudagrassConstantly 65 degrees F and rising at 4 inchesUniversity of Georgia Extension
Large patch fungicide window50 to 70 degrees FTexas A&M AgriLife Extension

Wisconsin Extension adds that crabgrass will not germinate in Wisconsin lawns until May or June, depending on weather and location, which is why the northern preventer job waits. Illinois Extension puts the crabgrass preventer around April 1 in Central Illinois. Your state page shows which belt you are in.

Cool-season belt

Start with a look at the lawn. Illinois Extension says snow mold is most visible as snow recedes in wet, cold weather, and that lawns usually fill in as temperatures warm, with severe damage needing overseeding. Missouri Extension's calendar for cool-season lawns, which it says is approximate for central Missouri and may vary by two weeks or more, lists these March jobs.

  • Apply broadleaf herbicide for perennial and winter weeds not controlled in the fall. Read the label, or see lawn weed control.
  • Overseed thin spots early if you missed them last fall (seeding and overseeding).
  • Power rake or mow before growth starts to remove excess old growth, which Missouri says also speeds soil warming and green-up (spring cleanup).
  • Have the soil tested if you have not done so recently.

Mowing starts when the grass is tall enough, with no need to wait, says Illinois Extension, which gives 2 to 3 inches for cool-season lawns and 3 to 4 inches for turf-type tall fescue. It says not to fertilize early in spring because that can stunt root growth, and to wait until mid-May. In Maryland the fertilizer ban ends March 1, though the University of Maryland Extension says a spring feeding should not be needed if the lawn was fed in the fall.

Transition belt

March is the busiest month for fescue lawns here. NC State's calendar says to apply preemergence herbicides for crabgrass, goosegrass and foxtail, typically in early March, sooner in the piedmont and coastal regions. It adds that white grubs may be active in March but spring curative applications are not effective. Arkansas Extension says to apply 1.0 pound of nitrogen per 1,000 square feet in March or early April, to keep tall fescue at 2.5 to 4 inches and to core aerate compacted areas as needed. The University of Maryland Extension says to wait until March or early April to sow seed, and puts crabgrass preemergents from mid-March through mid-April. Preemergents and spring seeding do not mix. Maryland's page says a preemergent cannot be used if you plan to reseed in spring.

Compare the numbers in a bag with the lawn supplies tool, and see lawn fertilizing and lawn mowing for the rules behind them.

Warm-season belt

Warm-season grass is still dormant or just waking, so March is about timing, not work. Clemson Extension says to apply a pre-emergent around mid-March in the piedmont and mountains, a second one 8 to 10 weeks after the first, and to delay soil-disturbing work such as aerating until just before the next pre-emergent date. Its weed-timing chart cautions against herbicides during spring green-up in March and April, and says not to apply them when the temperature exceeds 85 degrees F. The University of Georgia says to wait until soil is constantly 65 degrees F and rising at the 4-inch depth before spring nitrogen on bermudagrass.

In Texas, AgriLife's St. Augustinegrass guide says to make the first fertilizer application once the lawn has been mowed at least twice in spring, and says large patch is a fall and spring disease, so mowing is discouraged until disease activity stops. Take-all root rot is most prominent as turf comes out of dormancy. The East Texas county guide calls late February or early to late March prime dates for a pre-emerge. See aeration and dethatching for why cultivation waits.

Dry West

Colorado State Extension lists mid-March to April for spring nitrogen on bluegrass and ryegrass, and says buffalograss, blue grama and bermudagrass get none in spring. It also says the spring feeding may be skipped if the lawn was fed in fall and greens up well. Utah State's St. George calendar marks March for cool-season and warm-season seeding, cool-season fertilizing, preemergence and cool-season aeration, and says overseeding may be done in late winter, early spring or fall.

In the low desert, the University of Arizona says spring transition begins in March, when warmer temperatures favor bermudagrass over winter grass. It warns that overdoing water or fertilizer can favor the winter grass, and gives Phoenix water totals of 3.4 inches for the month. Prescott's Arizona calendar says only to adjust irrigation if necessary. See lawn watering and irrigation.

Before you buy anything

Measure the lawn first with the lot to lawn tool, so seed, fertilizer and quotes all use one square footage. The month before is February and the month after is April.

Questions people ask

When do I start mowing in spring?

When the grass is tall enough. Illinois Extension says not to wait, and gives 2 to 3 inches for cool-season lawns and 3 to 4 inches for turf-type tall fescue. In the warm belt, wait for green-up. See lawn mowing.

Is March the time for crabgrass preventer?

In parts of the South and transition belt, yes. NC State says early March, and Arkansas says late February to early March. In the Midwest it is April, and in Wisconsin the soil does not warm enough for germination until May or June.

Can I fertilize in March?

Sometimes. Arkansas says 1.0 pound of nitrogen per 1,000 square feet on tall fescue in March or early April, while Illinois says wait until mid-May and the University of Georgia says to wait for soil at 65 degrees F on bermudagrass. Check state fertilizer rules on your state page.

What do I do about snow mold?

Illinois Extension says infected areas may remain as weak or dead turf once conditions dry, that lawns usually fill in as temperatures warm, and that severe damage may need overseeding.

Sources

Timing comes from the extension publications above and was checked on November 20, 2026. Several are older editions (Arkansas about 2008, Utah State 2017, Clemson 2018 and 2021, Georgia 2019, Arizona 2020, Texas A&M 2020, NC State 2022), so your county extension office has the current dates.